SS100 ASI Signal Switcher

Smart switcher analizing TS form Monitor signal Monitor synchronous byte

Introduction 

According to different type, SS100 ASI signal switcher has many functions, such as 2X2,manual,automatic smart switch,single channel PID,multichanel PID, as well analizing TS, it can show to user directly TS status, synchronous byte error switching, long-time empty packet switching, PAT,PMT,SDT,CAT loss,channging or error switcher, signal losing switching, TS program broadcasting, it is coneneince to used for emergency switching such as digital satellite reciever,multiplexer to realize 1+1 redundant backup, this equipment can be used independently, openly controlling protocol make it can accepte many company’s network management software’s controlling, and can work with other equipment well..

Physical Structure 

  

Main Features

Function Characterices

Fully real-time monitor TSComprehensively analizing TS formMonitor signal see if it is interruptedMonitor synchronous bytePAT and PMT,CAT,SDT losing , change and errorBe able to monitor long time empty packet,the monitor time can be set Point to monitor signal channel or multichannel, can set interval time via each PID, monitor each PID and carrying out switchMonitor main and standby multichannl,2×2 is available

3,2 Warning function

Provide various failure warningWarning via LEDWarning via web managementWarning via log

Switching function

With smart emergency switching functionAdvanced and perfecct jugement regulation, it can multiple level switching in all wayIf the main channel signal is failure, it will switch to standby signal automaticallIf the main channel signal recovered normal, it will return to it automaticallyThere is no black scence while it switch signal

 Practical Function

Provide upt to 2 channel ASI distributing and outputInputed cable will balance function automatiocallySwtiching time can be set from 0 to 200 second freelySupport standard mode and Burst ModeRS232 and RJ45 network port, it is conveneice for management

Features

Provided detail PSI/ SI information Monitor signal interrupttedMonitor synchronous byte lossingMonitor PAT,PMT,CAT,SDT lossing and changingPoint one or multiple PID monitorLong time empty packet switchingMonitor main and standby signalJoint vairous switching condition

Techncial parameter

TS Input

2 channels ASI input (main and stand by which can switch automatically), Vpp>200 millivolt, BNC, impedance 75ΩMeets EN 50083-9, supports byte mode, package mode, supports 188, 204 package lengthCable balanced: >200m Belden 8281 cable

TS output

Two channels ASI output, Vpp=800 millivolt±10%, BNC, impedance 75ΩMeets EN 50083-9, supports byte mode, package mode, supports 188, 204 package lengthRemote ControlControl interface A1 Channel RS232 series control, bit-rate: 15200bit/s, 3 point socket Control interface B1 Channel TCP/IP network control, RJ-45 socket10/100Base-T self-adapting

General Characteristic

Physical structure   

1RU chassis (19")483x257x44mmWeight<4.0 Kg

Power

AC:110~240V;Frequency:50~60HzDC(optional):-48V,24V,12VMax. power consumption:per module<3W

Environment

Work temperature:0°C~55°CStorage temperature:-20°C~70°CHumidity:≤95%(none condensing)

Application

Construct network for DTV head-endDistributing and amplifying DVB-ASI/SDI signal routingAutomatically backup redundantly DVB-ASI/SDI signal

SS100 ASI Signal Switcher